Installing The Phone; Connecting The Telephone Line - RCA 1123 User Manual

Installing the Phone

Connecting the Telephone Line

NOTE: The unit is shipped from the factory
for placement on a level surface.
1. Choose an area near a telephone wall jack (RJ11C), and place your cordless
telephone on a level surface, such as a desktop or tabletop, or you may
mount it on the wall.
2. Plug one end of the telephone
line cord into the Line jack at
the back of the base and the
other end into a modular jack.
3. If you have another device
(example, an additional auxiliary
phone or data modem) need
to be connected to the unit ,
please connect it to the Data
jack on the back of the unit .
4. Connect one end of the coiled handset cord to the jack on the handset.
5. Plug the other end of the coiled handset cord to the jack on the base.
6. Adjust the RINGER VOLUME switch to the desired setting: HIGH, LOW or OFF.
The unit is properly installed if you pick up the handset and hear the dial
tone. If you don't hear a dial tone, recheck all the installation steps.