Technical Specifications; Interfaces; Antenna; Dc Input - Capsat TT-3080A User Manual

Technical Specifications

9 9 Technical Specifications Technical Specifications
9.1 9.1

Interfaces

Interfaces
9.1.1

Antenna

Please observ that the antenna cable carries the RF-signals as
well as power for the HPA/LNA front end situated in the antenna.
The antenna cable may as maximum have a cable loss of 10 dB at
1.66 GHz and a DC resistance of maximum 0.7 Ohm.
9.1.2

DC input

The polarity of the DC connector is as follows:
Ground
+Vdc
Please observ that DC-input voltage should be within the rated
input range measured at this connector under all conditions
including at start-up in order for the equipment to function
correctly. Low resistance leads should be used as the maximum
power consumption could be as high as 65 Watts.
13Jun00 13Jun00
Technical Specifications
Page 9-1 Page 9-1