Call From Connected Phone - Capsat TT-3080A User Manual

Call from connected phone

Call from connected phone
The phone book can be used to dial from either by selecting an
entry in the phone book and then press I or by using the short
code. In the latter situation press S followed by the short code.
Pressing I afterwards will establish the call. Pressing U
instead will show the actual number and the call can then be
established by pressing I or C or U.
Short code 0 contains
STfollowed by I will redial the last number.
5.4 5.4 Call from connected phone Call from connected phone
Making a call from a phone connected to either one of the analog
2w interfaces or the ISDN interface is done as international calls
followed by U. Calling Thrane & Thrane in Denmark (country
code 45) is done by pressing the following keys on the phone:
TTfgekggjjmmU
In case one of the 2 wire analog interfaces is used please make
sure that the selected interface is configured for a service which
supports voice (mini-M voice, speech or 3.1 kHz audio).
The display on the terminal handset
proceeds.
After hanging up the display will show for how long time the call
lasted.
The service type (mini-M voice, Speech or 3.1 kHz Audio) used
and the LES operator used will be the default setting as
configured. Chapter 7 Advanced functions contains more
information how to override the default selection without
changing the default setting.
13Jun00 13Jun00
Making calls Making calls
the last dialled number. Thus
will show how the call
Page 5-3 Page 5-3