Capsat TT-3080A User Manual page 56

Basic functions Basic functions
•
mini-M voice
•
mini-M fax
• mini-M data
•
Speech
•
3.1 kHz audio
•
64 kbit/s UDI (Universal Data Interface)
•
56 kbits UDI
•
IPDS
•
Print
In each menu all IMN's associated with a specific service should
be inserted. The IMN's are given by the ISP when commissioning
the terminal. After inserting an IMN number and pressing C the
handset will show "ID" and a number. The ISP may also have
indicated the corresponding ID's along with the IMN-numbers. If
the ID shown by the terminal corresponds with the ID given by
the ISP press C. If not correct the ID to the correct and then
press C. If the ISP has not indicated the ID for each IMN number
two situations exist:
If there is not more than one IMN-number pr. service the ID
shown by the terminal will always be correct and thus just press
C.
If there is more than one IMN-number pr. service the normal rule
is that the first (or upper) IMN on the returned commissioning
form will have the lowest ID and each subsequent IMN-number
will have an ID which is 1 higher than the predecessor. Please
remember that the ID's are hexadecimal numbers. In case the
IMN's are combined with the wrong ID's the wrong interface may
be activated for incoming calls and reference IMN for an
hardware interface when making outgoing will be wrong. Thus
service type and billing will be otherwise than expected. The ISP
may help you with this.
ID's are entered as decimal and the allowed range pr. service
type is as follows:
Page Page 6-10 6-10
Phone setup Phone setup
13Jun00 13Jun00