Getting Started - Capsat TT-3080A User Manual

Charge indicator Charge indicator
4 4

Getting started

Getting started
Connect the different parts of the Capsat Messenger and insert
the SIMM card if you have this.
Take care to insert the SIMM card face down: The SIMM Card Take care to insert the SIMM card face down: The SIMM Card
is inserted with the golden contact area pointing upwards is inserted with the golden contact area pointing
heading towards the card slot. heading towards the card slot.
First of all it is necessary to configure the terminal with respect to
the different IMN numbers which have been assigned to this
terminal. The terminal supports 8 different services, which may
have 0,1 or up to 16 IMN numbers assigned, and the terminal has
6 hardware interfaces of which the ISDN interface may have 8
devices attached, so it is necessary to tell the terminal
•
How calls made to each IMN number should be routed
(which hardware interface should ring when an IMN number
is called).
•
For each hardware interface it is necessary to setup a default
IMN, which should be used for billing if a call is initiated
from here. As all IMN's are associated with one service type
the default service type for calls initiated from this interface
is thus also defined.if the device attached makes a call.
Normally this is done once for a terminal either by yourself or by
the ISP. The following description assumes that the terminal is
configured for example by using the Phone setup menu on the
handset. Details of how to do this is described in section 6.7
Phone setup. The PC Configuration program may also be used.
The terminal has a directional antenna and it is necessary to point
the antenna in the direction of the satellite and there may not be
any obstacles in between.
13Jun00 13Jun00
Getting started Getting started
upwards and and
Page 4-1 Page 4-1