Mmi Setup - Capsat TT-3080A User Manual

Phone setup Phone setup
The sleep mode gives the possibility to prolong the standby time
without loosing the ability of receiving or making phone calls.
The terminal turns off everything unnecessary, which includes the
display and key illumination.
In normal sleep mode the terminal wakes up instantly when
activating a key.
In deep sleep mode it takes about 1-2 seconds before the
terminal is ready for use. The standby time for deep sleep mode
is longer than for normal sleep mode. Eventually see section 9
Technical Specifications.
6.7.6

MMI setup

The MMI setup menu has got the following submenus:
•
Antenna Beep
•
Key beep
•
Contrast
•
Ring tone
•
Ring volume
•
Time
•
Date
•
Language
The Antenna beep Antenna beep menu is used to turn on/off the audible tone in
the antenna, which indicates the quality of the received signal.
This is used during antenna fine alignment.
The Key beep Key beep menu is used to turn on/off the key beep. If on, a
beep will be heard every time a key on the handset is pressed.
The Ring tone Ring tone menu is used to configure the type of ring signal
and the Ring volume Ring volume menu is used to set the ring volume.
There are 8 ring types to select between and 8 volume levels.
13Jun00 13Jun00
Basic functions Basic functions
Page 6-17 Page 6-17