Table of Contents
Advertisement
Getting started
Getting started
or lowering the antenna panel and locking it by means of the two
brass knobs. The elevation markings on the side of the frame will
assist in setting the correct position.
Use the audible signal strength indicator on the telephone to
search for the maximum signal. See detailed information on how
to use the audible signal strength indicator in chapter 4.3
Antenna Cable Installation
Antenna Cable Installation
Carefully unroll the cable, taking care not to twist or bend it. After
the
cable can be connected to the HPA/LNA-box at the rear of the
antenna.
Notes
Notes
•
The antenna radiates RF signals during a call, therefore a safe distance
must be observed). Allow a passage distance of 0.5 meter from the
antenna. The radiated signal is strongest on the focal line of the antenna
and drops off quickly! The antenna can be secured to the ground by
loading the frame with sandbags, bricks or other suitable weights. Keep
the front panel of the antenna free from obstructions!
•
Precise adjustment of the antenna will make it possible for the RF power
amplifier to reduce the transmitted power automatically to the required
minimum for a reliable satellite connection. This will result in an
extension of the battery capacity with up to 30%, depending on the exact
application.
Page
Page 4-10
4-10
Pointing the antenna
Pointing the antenna
antenna has been positioned, the
13Jun00
13Jun00
Advertisement
Table of Contents
