Basic functions
Basic functions
It is possible to route one IMN to more interfaces. With the
exception that the same IMN can not be routed simultaneously to
both analog 2-wire interfaces (RJ11 interfaces).
The print-menu is used to printed all this information to the RS-
232 interface.
6.7.3
Route outgoing
This menu has got the following submenus:
•
Handset
•
1st RJ11
•
2nd RJ11
•
RS-232
•
USB
•
ISDN
•
Print
For each interface it is necessary to select which IMN-number
should be used for reference (billing) and thus which default
service type should be used.
A # is used to indicate which of the possible IMN's should be
used. Pressing U implies that this IMN is now the selected one
and the previous IMN is deselected.
Each of the two RJ11 menu's gives the possibility to select the
default service to be used for these two 2-wire interfaces:
•
mini-M voice
•
mini-M fax
•
Speech
•
3.1 kHz audio
The ISDN-menu is used for the same except that it is possible to
specify a default IMN number for each service type relevant for
ISDN.
Page
Page 6-12
6-12
Phone setup
Phone setup
13Jun00
13Jun00