Table of Contents
Advertisement
The Capsat Messenger
The Capsat Messenger
therefore important that no persons or animals are within the
safety distance.
The battery pack must be handled in a certain way, please see
the details in section 3.5 Handling of the battery pack.
If another DC-source is used and/or another non-Thane & Thrane
antenna cable is used please make sure that the necessary
precautions described in section 9.1.2 DC input and in section
9.1.1 Antenna respectively are taken. Thrane & Thrane offers a
wide range of antenna cable from 4 m up to 70 m.
3.1
3.1
Hardware interfaces
Hardware interfaces
The Electronics Unit of the Capsat Messenger has the following
hardware interfaces:
•
Handset
•
Analog 2-wire number 1
•
Analog 2-wire number 2
•
ISDN
•
RS-232
•
USB (Universal Serial Bus)
•
Audio input/output
Except the handset the connectors for these interfaces are found
on the rear of the Electronics Unit:
Antenna
Phone / Fax
ISDN
USB
These interfaces can be used for the different Global Area
Network services, but there are possibilities as well as constrains,
which will be described in the following.
Page 3-2
Page
3-2
Hardware interfaces
Hardware interfaces
Fuse Reset
Audio
Audio
RS-232
DC Power
in
out
9.5
18.5
V
Max.
60W
-
13Jun00
13Jun00
Advertisement
Table of Contents
