Satellite Setup - Capsat TT-3080A User Manual

Basic functions Basic functions
SIMM card. Mailbox messages received with the SIMM card
inserted will be deleted when the card is removed from the
terminal.
6.6 6.6

Satellite setup

Satellite setup
This menu is used to select area and LES operator. It contains the
following sub menus:
•
LES
•
Area
•
Spot-beam
The LES LES menu contains the following sub menus:
•
Default LES
•
Prefer LES
•
Allowed LES
•
Std def LES
•
Std pref LES
•
Std all LES
For each entry a list exist for each of the 4 ocean regions. All lists
are only available when the terminal is connected to the NCS.
The Default LES Default LES list contains a list of those LES operators which
may be selected as gateway to the terrestrial network. The last
used LES will be marked with * and this LES will also be tried
used next time the terminal is logged on again. Use C to select.
The Allowed LES Allowed LES list contains all available LES operators. Those
operators marked with * can be used as Default LES operator and
thus appears in the Default LES list above. If all LES operators are
allowed and can be used there is no markings.
To make selection more easy as many operators exist the Prefer
LES LES list can be used to indicate in which order LES operators
should appear on the Default LES list. This is done by entering a
Page Page 6-6 6-6
Satellite setup Satellite setup
Prefer
13Jun00 13Jun00