Simm Card - Capsat TT-3080A User Manual

SIMM card

SIMM card
The following table shows the function of the keys, which are used
to utilise the menu system. The menu system is entered by
pressing ]J. A description of all menus is given in section 6
Basic functions.
Key Function
B Scrolling up – menu or predefined values
E Scrolling down – menu or predefined values
Exit menu and cancel selection
A
C Accept selection
D Delete/backspace
F Toggle between alpha mode and normal mode
]D Insert an entry (in phone book for example)
Edit an existing entry (phone book for example)
]B
]F Delete an existing entry (phone book for example)
3.3 3.3 SIMM card SIMM card
The terminal also supports usage of a SIMM card. If inserted the
terminal will have a new identity (a new set of IMN numbers and a
new set of allowed LES Operators) on the Global Area Network
corresponding to the information stored on the SIMM card. If
removed again the information stored in the terminal just prior to
the SIMM card insertion will be active again.
Depending in the configuration of the terminal it may be
mandatory to insert a SIMM card before operation can begin. An
ISP may give the possibility for a terminal configured like this to
enter the Help Desk in case the SIMM card is lost or not working.
This is done by pressing GT. The Help Desk contains phone
numbers to get help in this situation.
Take care to insert the SIMM card face down: The SIMM Card Take care to insert the SIMM card face down: The SIMM Card
is inserted with the golden contact area pointing is inserted with the golden contact area pointing upwards
heading towards the card slot. heading towards the card slot.
13Jun00 13Jun00
The Capsat Messenger The Capsat Messenger
upwards and and
Page 3-9 Page 3-9