Sleep Mode - Capsat TT-3080A User Manual

Basic functions Basic functions
In the STU menu STU menu it is possible to enable/disable the STU-option.
This requires a special Thrane and Thrane PIN-code, which
follows the STU option.
The SIMM lock SIMM lock menu is used to specify whether the terminal is
locked to operate with SIMM cards or not. When locking the
terminal to use SIMM cards, then a SIMM card ID must be
specified. The options are:
•
Disable
•
ICC ID
The Inmarsat defined SIMM card serial number which
includes the identity of the service provider. With this option
the service provider's identity number should be entered.
•
GID 1
This option requires SIMM cards which in addition to the
Inmarsat specification also supports the GID 1 file as defined
in the coming GSM standard, GSM 02.22 section 6.
•
Semi lock
Enabling this feature makes it possible to use the terminal
either without a SIMM card or with a SIMM card but only from
a specific service provider. The feature can only be enabled
after entering a GID1 or ICCID.
In case the terminal is locked to SIMM card and you do not have
the SIMM card this sub menu can be accessed by pressing
Gl.
6.7.5

Sleep mode

The sleep mode menu is used to either disable the sleep mode
function or to activate one of two sleep modes:
•
normal sleep
•
deep sleep
Page 6-16 Page 6-16
Phone setup Phone setup
13Jun00 13Jun00