Phone Setup - Capsat TT-3080A User Manual

Basic functions Basic functions
6.7 6.7

Phone setup

Phone setup
The Phone setup menu has got the following sub menus:
•
Tel. numbers
•
Route incom.
•
Route outg.
•
Security
•
Sleepmode
•
Reset setup
•
MMI setup (Man Machine Interface)
•
RS-232 parameters
The Tel. numbers Tel. numbers menu stores all of the IMN numbers which this
terminal has been commissioned for. It is necessary to enter all of
these before it is possible to define the internal routing of these
numbers to the different hardware interfaces.
The Route incom Route incom menu is used to configure the terminal
regarding which IMN numbers should be routed to which
interface (handset, 2-wire analog interfaces, ISDN etc).
The Route outg Route outg menu is used to select which IMN-number should
be used for billing for each of the different hardware interfaces
and thus a default service type is also selected. An example: The
handset is configured to always use inexpensive mini-M voice, if
a call is initiated from here, whereas one of the analog phone
interfaces is configured to always use "3.1 kHz audio" when a call
is initiated from here.
To give a better overview of these three submenus the figure
following indicates the routing matrix representing all three
menus as can be seen in the PC configuration software. The X's
indicates which IMNs are routed to which hardware interface,
whereas # indicates default IMN for billing and thus service type
for each hardware interface.
Page Page 6-8 6-8
Phone setup Phone setup
13Jun00 13Jun00