The Handset - Capsat TT-3080A User Manual

The handset

The handset
The printer function makes it possible to print different internal
settings of the terminal (phone book for example) by means of
the handset. The serial printer is assumed to be connected at the
RS-232 interface when activating a print.
When using the PC configuration software it should be connected
to the RS-232 interface as it utilises the configuration capability.
The USB USB interface usage is to be defined.
The Audio input/output Audio input/output interface can for example be used
together with a headset and a tape recorder (DAT recorder) and
is to be considered as an alternative audio input/output to the
handset. The handset is used to establish a connection. Hereafter
it is possible to toggle between handset microphone/speaker and
audio input/output by pressing GE on the handset.
See section 6.7 Phone setup for more information on how to route
incoming calls to which hardware interface and to setup the
default service to be selected for each hardware interface for
outgoing calls.
3.2 3.2 The handset The handset
The handset contains indicators, LCD display and keypad
together with microphone, ear-piece and adjustable volume.
The H is used to turn the terminal on and off. Turning off
requires that the key is hold down for at least 3 seconds. The
display will count down the seconds.
The display contains a set of symbols which together with the 4
indicators situated below the display give continuously indication
of current status.
The following tables give a short overview of these symbols and
indicators.
13Jun00 13Jun00
The Capsat Messenger The Capsat Messenger
Page 3-5 Page 3-5