Calling the terminal
Calling the terminal
5 5
Making calls
Making calls
After having configured and made the terminal ready for
operation as described in the previous section it can used to
make calls and to receive calls.
5.1
5.1
Calling the terminal
Calling the terminal
Calling the terminal or a device connected to the terminal is
similar to making international calls. The specific IMN-number (a
terminal may have more numbers as different services exist and
more devices may be connected to the different hardware
interfaces of the terminal) has to be preceded by one of the five
possible international access codes for the Global Area Network.
This depends on whether you know which area the terminal is
within or not:
870: Area of terminal not known
(requires that the LES supports Mobility Management).
871: AORE
872: POR
873: IOR
874: AORW
To call IMN-number on a terminal situated in IOR dial
+873........
5.2
5.2
Transferring incoming calls
Transferring incoming calls
In case an incoming call is routed to more hardware interfaces
and is answered on a wrong hardware interface it is possible to
transfer the call to another interface by using the GN followed
13Jun00
13Jun00
Making calls
Making calls
Page 5-1
Page
5-1