The Capsat Messenger - Capsat TT-3080A User Manual

Hardware interfaces Hardware interfaces
3 3

The Capsat Messenger

The Capsat Messenger
The terminal contains the following system components:
•
TT-3038A Capsat Messenger Electronics Unit
•
TT-3620D Capsat Messenger Handset
•
TT-3686C Capsat Messenger NiMH Batte(supplied as default)
or
•
TT-3686D Capasat Messenger NiCd Battery Pack
•
TT-3682B Capsat Messenger AC adapter
•
TT-3008A Capsat Messenger Antenna
or
•
TT-3008B Capsat Messenger Big Dish Antenna
•
TT-10226A Capsat Messenger PC Configuration Software
•
Accessories
Before using the terminal it is first necessary to unpack and
connect the handset to the electronics unit. The handset connects
at the bottom of the electronics unit. A small plastic lid is inserted
on top of the cable connector after inserting the handset cable in
the electronics unit. The terminal can be powered by means of
the battery pack if inserted and/or an external DC power source
connected at the rear of the electronics unit. As DC power source
the accompanying AC adapter may be used.
Depending on which external devices are connected to the
terminal on the rear it may be necessary to configure the terminal
in order for it to route the incoming calls to the wanted hardware
interface. Section 3.1 Hardware interfaces gives an overview of
the different hardware interfaces and section 6 Basic functions
further discusses how to configure the terminal.
The antenna, connected at the rear, radiates micro wave signals
during a call with the strongest radiated signal in front of the
antenna (on the focal line) and drops off fairly quickly. It is
13Jun00 13Jun00
The Capsat Messenger The Capsat Messenger
Page 3-1 Page 3-1