Pointing the antenna
Pointing the antenna
4.2.2
Pointing the 3008B Antenna
Below is shown an overview of the optional 3008B Big Dish
antenna, which consists of a flat planar antenna element and a
supporting frame. The HPA-LNA is mounted on the back of the
antenna element.
Position the antenna on a flat surface, with a clear line of sight
towards the satellite. The azimuth orientation can be adjusted by
turning the antenna so that the sides of the mounting frame are
pointing towards the satellite. Set the elevation angle by raising
13Jun00
13Jun00
Getting started
Getting started
Page 4-9
Page
4-9