Security - Capsat TT-3080A User Manual

Phone setup Phone setup
Activating the print-menu will imply that all information herein
will be printed to the RS-232 interface.
6.7.4

Security

The Security menu has got the following submenus:
•
PIN codes
•
Allowed Dial
•
Autoprefix
•
Bar serv in
•
Bar serv out
•
Ph. Book dial
•
SIMM lock
•
STU (if option installed)
The PIN codes PIN codes menu gives the possibility to change the different
PIN codes. There are four PIN codes:
•
PIN1 (4-8 digits)
•
PIN2 (4-8 digits)
•
CONFIG PIN (4-8 digits)
•
SIMM lock PIN (10 digits)
If a SIMM card is inserted the PIN1 and PIN2 codes will be the
ones stored on the SIMM card otherwise these two PIN codes will
be the ones stored in the terminal.
The PIN1 PIN1 code controls general access to the terminal. If enabled
it is only possible to use the terminal if PIN1 is entered when the
terminal prompts for it. The PIN1 code in the terminal when
delivered from the factory is equal to the PIN1 unblock code (8
digits). The PIN1 unblock code is used to unblock the terminal
when it blocks due to 3 attempts with wrong PIN1 codes.
On SIMM cards 10 attempts to unblock PIN1 can be done. After
that the SIMM card can not be unblocked, but has to be returned
to the ISP.
13Jun00 13Jun00
Basic functions Basic functions
Page 6-13 Page 6-13