Call From Handset - Capsat TT-3080A User Manual

Making calls Making calls
by a number indicating the hardware interface. The hardware
interfaces have the following numbers or local extensions:
Handset 0
1 st 2-wire 1
nd
2 2-wire 2
RS232 3
ISDN 4
USB 5
It is possible to address a specific device on the ISDN interface if
more devices are connected in parallel to this interface. This
requires that the IMN-number has been programmed into the
ISDN device as a socalled MSN (Multiple Subscriber Number). In
this case press GN followed by the IMN number.
5.3 5.3

Call from handset

Call from handset
When making calls from the handset just type in the phone
number as if you were making an international call (with prefix
for automatic international calls equal to 00). To call Thrane &
Thrane in Denmark (country code 45) press
TTfgekggjjmm
preceded by I or C or U. The display on the terminal
handset will show how the call proceeds.
After hanging up the display will show for how long time the call
lasted.
The service type (mini-M voice, Speech or 3.1 kHz) used and the
LES operator used will be the default setting as configured.
Chapter 7 Advanced functions contains more information how to
override the default selection without changing the default
setting.
Page Page 5-2 5-2
Call from handset Call from handset
13Jun00 13Jun00