Table of Contents
Advertisement
Chapter 2 System Setup
2.1 A Quick Tour of the Panel PC
Before you start to set up the panel PC, take a moment to become familiar
with the locations and purposes of the controls, drives, connectors and
ports, which are illustrated in the figures below.
When you place the panel PC upright on the desktop, its front panel
appears as shown in Figure 2-1.
Figure 2.1: Front view of PPC-L156T panel PC
When you turn the panel PC around and look at its rear cover, you will
find the I/O section as shown in Fig. 2-2. (The I/O section includes vari-
ous I/O ports, including serial ports, parallel port, the Ethernet port, USB
ports, the Line-in/Line-out jack, and so on.) The battery door cover is at
the bottom of the panel PC, as shown in Fig. 2-4.
PPC-L156T User Manual
10
Advertisement
Table of Contents
