Advantech PPC-L156T User Manual page 30

4. Place the HDD on the metal plate, and tighten the screws.
5. The HDD cable (1 x 44-pin to 1 x 44-pin) is next to the Mini PCI
socket, Connect the HDD cable to the PC board (CN6). Make sure
that the red wire corresponds to Pin 1 on the connector, which is
labeled on the board. Plug the other end of the cable into the IDE
hard drive, with Pin 1 on the cable corresponding to pin 1 on the
hard drive.
6. Put the plastic HDD cover and tighten the screws.
PPC-L156T User Manual
Figure 3.3: Installing primary 2.5" HDD
20