Specifications - Com Module Rs-232; Pca100294-1 - Hatteland HD 12T21 User Manual

Series x maritime multi computer (mmc)
Hide thumbs Also See for HD 12T21:
Table of Contents

Advertisement

Specifications - COM Module RS-232

DATA SHEET
Manufacturer:
Product:
Typenumber:
Description:
The Hatteland Display COM modules provide the system with quad independent COM channels. The module is attached to the
motherboard via standard USB interface. Application software access the COM channels as standard COM devices, i.e. in the normal
case is there no requirements for additional software development. This module will mainly be integrated, electrical and mechanical,
in the final product such as Series X 12, 13, 15, 17, 19, 24 and 26 inch Panel Computers and selected Stand-alone Computers.
Features:
- 4 independent channels (If a card is replaced most operating system will not change COM port number)
- Outputs are short circuits protected
Internal USB to 4 channel x RS-232 non isolated
• Features
• Connector
• Data Rate
• ESD Rating (IEC 1000-4-2 Air)
(RS-232 I/Os)
• ESD Rating (IEC 1000-4-2 Contact)
(RS-232 I/Os)
• Test and certi cate
• Supported Operating Systems (OS)
Illustration and Pinning:
Note: Product below for illustration only. Location of module and product size/design may differ. Connector/pinning remain the same.
B
A
4 Ports available in Operating System as:
COMx (A), COMx (B), COMx (C), COMx (D)*
*Configuration dependent, x = next available port number(s) in operating system.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.

PCA100294-1

IND100129-139
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS.
The products may not be copied or duplicated in any way.
Hatteland Display AS
COM Module RS-232
PCA100294-1
COM MODULE
All channels have support for all RS-232 DB-9 signals
Standard RS-232 DB-9 male housing and pinning
230kbps
±15 kV
±8 kV
Hatteland Display standard,
(tested / type approved by the following classification societies):
IEC 60945 4th (EN 60945:2002), IACS E10, ClassNK - Nippon Kaiji Kyokai (Pending),
GL - Germanischer Lloyd, DNV - Det Norske Veritas, ABS - American Bureau of Shipping,
CCS - China Classification Society (Pending), BV - Bureau Veritas,
LRS - Lloyd's Register of Shipping (Pending)
Embedded Enterprise (WEE): Microsoft® Windows® XP Professional (Eng, SP3, SP2c),
Microsoft® Windows® Server 2003/2008/2008R2 (Eng), Microsoft® Windows®
2003/2008/2008R2 (Eng), Microsoft® Windows® 7 Professional/Ultimate (Eng, SP1).
Linux: openSUSE® 11.4, Fedora™ 15, Ubuntu® 10.04 LTS, Ubuntu® 12.04 LTS.
D
C
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
All specifications are subject to change without prior notice!
Last Revised:
Revision#:
PIN 01 DCD Data Carrier Detect
PIN 02 RxD Receive Data
PIN 03 TxD
PIN 04 DTR Data Terminal Ready
PIN 05 GND Signal Ground
PIN 06 DSR Data Set Ready
PIN 07 RTS Request To Send
PIN 08 CTS Clear To Send
PIN 09 RI
48
18 Apr 2013
06
1 2 3 4 5
6 7
8 9
Transmit Data
Ring Indicator
1/2

Advertisement

Table of Contents
loading

Table of Contents