Table of Contents
Advertisement
Physical Connections
In this expansion area of the unit, optional factory mounted modules may be available (see illustrations below or
dedicated Data Sheets as well as "Housing / Terminal Block Connector Overview" in this manual for more
information). Connect and secure your cables to the Terminal Blocks or connectors, depending on module installed.
The table below lists all modules currently available for factory mounting.
Illustration
LPT
Audio Out
Internal support for remote controlling MMC units:
A detailed description of the SCOM (Serial/Ethernet Communication) can be found here:
http://www.hatteland-display.com/pdflink/inb100018-4.php
manual for additional help during preperation and/or installation of external equipment intended to communicate with.
IND100133-45
EXPANSION AREA for Optional modules:
4 x RS-422/RS-485 NMEA (PCA100293-1), Terminal Block 3.81 connection module.
4 x RS-232 (PCA100294-1), DSUB 9P Male connectors module.
1 or 2 x CAN isolated (HT 00254 OPT-A1), Terminal Block 3.81, 2 channel module(s).
1 x Standard LPT1 Parallel (Bi-Directional/EPP/ECP).
D-SUB 25P Female connector.
1 x 2W Amplified Audio Mono/Stereo Out (HT 00235 OPT-A1).
D-SUB 9P Female connector.
2 x Isolated Digital IO (4 Output + 4 Input) (HT 00268 OPT-A1), Terminal Block 3.81
connection module.
Description
- Review also the "Pinout Assignments" chapter in this
33
Advertisement
Table of Contents
