I Memory Bank Setting - Icom IC-R20 Instruction Manual

6
MEMORY CHANNELS

I Memory bank setting

The IC-R20 has a total of 26 banks
channels, 000 to 999, are assigned into the desired bank for
easy memory management.
qPush [MR S.MW] for 1 sec. to select the select memory
write condition.
• 1 short and 1 long beep sound.
• "µ " indicator blinks.
w Rotate [R-DIAL] to select the desired memory channel.
eWhile pushing [8 SET], rotate [R-DIAL] to select "BANK"
item.
• "BANK" item can also be selected by pushing [8 SET] several
times.
• Bank group and channel number is displayed if the selected
memory channel has already been assigned into a bank, the
previous.
27
. Regular memory
(A to Z)
[R-DIAL]
146.010
BAND
SET
MR
S.MW
After 8 is pushed
SET
146.010
8
rWhile pushing [BAND], rotate [R-DIAL] to select the de-
sired bank group from "A" to "Z."
• The bank group can also be selected by pushing [BAND] sev-
eral times.
tAfter releasing [BAND], rotate [R-DIAL] to select the bank
channel number from "00" to "99."
• Vacant bank channel numbers are only be displayed.
µ
yPush [MR S.MW] for 1 sec. to set the channel into the
bank.
• Return to the previous indication.
µ
146.010
µ
Bank group is selected with
BAND
146.010
µ
Bank channel is selected with [R-DIAL]