Memory Bank Setting - Icom IC-R1500 Instruction Manual

■ Memory bank setting

The IC-R1500 has a total of 21 banks (A to H, J to R, T, U,
W, Y). Regular memory channels, 0 to 999, may assigned
into the desired bank for easy memory management.
q Select the desired memory channel.
➥ Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel.
• "!" and memory channel number appear.
wPush [S.MW•MW] to enter select memory write mode.
• "!" indicator and the memory channel number blink.
e Push [TS•MODE] once to select "bAnk."
[TS•MODE]
rRotate [DIAL] to select the desired bank and bank channel.
• Push [SET•LOCK] to toggle the bank or bank channel selection.
• Banks A to H, J to R, T, U, W and Y are available.
• Vacant bank channel numbers are only be displayed.
tPush and hold [S.MW•MW] for 1 sec. to program the bank
and exit select memory write mode.
After [TS•MODE]
released
MEMORY OPERATION
Bank selection Bank channel selection
5
[
5
22