I Setting A Bank And Memory Channel - Icom IC-R10 Instruction Manual

I Selecting a BANK and memory channel
Selecting a BANK
channel
When your desired memory channel
is not stored or you do not want to
store a frequency in the displayed
BANK, you must change the BANK
number.
While pushing [FUNC], rotate [DIAL].
Selecting a memory
channel—1
If you want to recall a memory chan-
nel which has been memorized, this
is the easiest way.
Rotate [DIAL].
MEMORY MODE
Selecting a memory
channel—2
If you remember the memory channel
number you want to recall, this is the
fastest way to recall it.
Enter the full 2-digit memory channel
number via the keypad.
Also, when you want to recall a blank
channel for programming, you have
to enter a channel number via the
keypad.
4
24