Cloning; Transceiver-To-Transceiver Cloning; Cloning Cable - Icom IC-V85 Instruction Manual

13

CLONING

Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another trans-
ceiver.

■ Transceiver-to-transceiver cloning

q Connect the OPC-474
the master and sub-transceivers.
• The master transceiver is used to send data to the sub-trans-
ceiver.
Master transceiver
59
to the [SP] jack of

CLONING CABLE

Sub transceiver
w While pushing [FUNC] and [Y Y ], turn power ON to enter
cloning mode (master transceiver only— power ON for
sub-transceiver).
• "CLONE" appears and the
transceivers enter the clone
standby condition.
POWER ON
AT
PWR
PWR
D
A B C
FUNC CALL MR CLR
TONE BANK
P.BEEP T.SCAN
1
2 3
DUP OPT
SCAN SKIP
4 0
5 6
PRIO SET H/M/L
7 8
9 ENT