Cloning; Transceiver-To-Transceiver Cloning - Icom IC-V82-T Instruction Manual

Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another trans-
ceiver.

■ Transceiver-to-transceiver cloning

q Connect the OPC-474
CLONING CABLE
the master and sub-transceivers.
• The master transceiver is used to send data to the sub-trans-
ceiver.
w While pushing [A•
to the [SP] jack of
turn power ON to enter cloning
mode (master transceiver only—
power ON for sub-transceiver).
• "CLONE" appears and the transceivers
e Push [PTT] on the master trans-
ceiver.
• "CL OU" appears in the master transceiver's display and S-meter
• "CL IN" appears automatically in the sub-transceiver's display
r When cloning is finished, turn power OFF, then ON again
to exit cloning mode.
NOTE: DO NOT push [PTT] on the sub-transceiver during
cloning. This will cause a cloning error.

CLONING

] and [Y Y ],
FUNC
enter the clone standby condition.
indicator shows that data is being transferred to the sub-trans-
ceiver.
and S-meter indicator shows that data is being received from
the master transceiver.
13
POWER ON
AT
PWR
A
FUNC
12
13
71