Icom IC-V85 Instruction Manual page 19

[6• ]
SKIP
➥ Input digit "6" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], sets and cancels skip
setting for memory scan during memory mode.
(p. 37)
[7• ]
PRIO
➥ Input digit "7" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], starts priority watch.
(p. 38)
[8• ]
SET
➥ Input digit "8" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], enters into
(p. 47)
[9• ]
H/M/L
➥ Input digit "9" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], switches transmit power
between high, middle and low output power.
(p. 19)
When the transceiver becomes hot during
high or middle output power operation, the
built-in protection circuit activates to reduce
the transmit output power to 3 W
.
SET MODE
.
(approx.)
PANEL DESCRIPTION
[0• ]
OPT
➥ Input digit "0" during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], selects an optional func-
tion mode, such as pager or code squelch op-
eration. (pgs. 45, 46)
[#• ]
BANK
After pushing [FUNC], enters a memory bank se-
lection. (p. 30)
[✱ • ]
ENT
➥ Sets the frequency even if the full 6 digits of
frequency have not been entered. (p. 17)
➥ After pushing [FUNC], switches key lock func-
tion ON and OFF when pushed and held for 1
sec. Lock all keys, except [PWR], [PTT],
[MONI] and audio level adjustment. (p. 20)
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
6