Icom IC-V85 Instruction Manual page 68

11
SET MODES
D D Monitor key action
The monitor key, [MONI], can be set as a 'sticky' key. When
set to the sticky condition, each push of [MONI] toggles the
monitor function ON and OFF.
• PU (Push) : Pushing and holding [MONI] to monitor the fre-
quency. (default)
• HO (Hold) : Push [MONI] to monitor the frequency and push
again to cancel it.
D D Tuning speed acceleration
The tuning speed acceleration automatically speeds up the
tuning speed when pushing and holding [Y Y ] or [Z Z ], or rotat-
ing [VOL] rapidly.*
• S–S.At : The tuning speed acceleration is activated. (de-
fault)
• S–S. m : The tuning speed acceleration is not activated.
*When tuning dial is assigned with [VOL].
55
D D Mic simple mode
This item turns the microphone simple mode ON and OFF.
Microphone simple mode is used to change the function as-
signments for keys in the optional HM-75A
- as below. This assignment is conve-
SPEAKER MICROPHONE
nient for 3-channel use of simple operation.
• mIC.n1 : Normal 1 (default)
• mIC.n2 : Normal 2
• mIC.Sm: Simple mode
HM-75A
Mode NORMAL1
key
Freq. [CALL]
[A]
CH Null
Freq. VFO/Memory
[B]
CH Null
Freq. Freq. Up
[Y Y ]
CH Memory CH Up
Freq. Freq. Down
[Z Z ]
CH Memory CH Down Memory CH Down
A 1750 Hz tone can be transmitted with the HM-75A opera-
tion.
➥ Push [A] while pushing [PTT].
Optional HM-75A required
REMOTE CONTROL
NORMAL2 SIMPLE
[MONI] [MONI]
VFO/Memory
[CALL]
Null
Freq. Up
MR-00CH
Memory CH Up
Freq. Down
MR-01CH