Transferring Bank Contents - Icom IC-V85 Instruction Manual

6
MEMORY/CALL OPERATION

■ Transferring bank contents

Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or erased.
➥ Push [MR] to select memory mode.
➥ Push [FUNC] and [
then rotate [VOL] to select the
desired memory bank.
• Bank indicator blinks.
➥ Push [✱
] (or [CLR]) to se-
ENT
lect the bank then push [Y Y ]
and [Z Z ] to select the desired
contents.
• Bank indicator stops blinking.
31
](#),
BANK
[VOL]
PWR
A D
B C
FUNC CALL MR CLR
TONE BANK
P.BEEP T.SCAN
1
2 3
DUP SKIP OPT
SCAN
4 0
5 6
PRIO
SET H/M/L
7 8 9 ENT
w Push [FUNC] and [
SET
enter .
SET MODE
e Push [Y Y ] or [Z Z ] several times
until "bAk" appears.
• Bank indicator appears.
r Rotate [VOL] to select the de-
sired bank to receive the trans-
ferred information or erase the
bank contents.
• Select "– –" indication when erasing
the contents from the bank.
t Push [✱
] (or [CLR]) to transfer or erase, and return to
ENT
regular memory mode.
y Repeat steps q to t for transferring or erasing an an-
other bank's contents.
](8) to
[VOL]
PWR
A D
B C
FUNC CALL MR CLR
TONE BANK
P.BEEP T.SCAN
1
2 3
DUP SKIP OPT
SCAN
4 0
5 6
PRIO
SET H/M/L
7 8 9 ENT