Memory Bank Selection; Memory Bank Setting - Icom IC-V85 Instruction Manual

■ Memory bank selection

The IC-V85 has a total of 10 banks (A to J). Each memory
channel, 0 to 99, may be assigned to one of the banks for
easy memory management.
q Push [MR] to select memory mode.
C
Push
MR
w Push [FUNC] and [
BANK
enter memory bank selection.
• Bank indicator blinks.
e Rotate [VOL] to select the de-
sired bank, A to J.
• Banks that have no programmed
contents are skipped.
r Push [✱
] (or [CLR]) to select
ENT
the bank.
• Indicator stops blinking.
t Push [Y Y ] or [Z Z ] to select the channel in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory condition, push [FUNC] and
](#) to enter memory bank mode, then push [✱
[
BANK
(or [CLR]).
](#) to
[VOL]
PWR
A D
B C
FUNC CALL MR CLR
TONE BANK
P.BEEP T.SCAN
1
2 3
DUP SCAN SKIP OPT
4 0
5 6
PRIO
SET H/M/L
7
8 9 ENT
ENT
MEMORY/CALL OPERATION

■ Memory bank setting

q Push [MR] to select memory mode, then select the desired
memory channel via [Y Y ] or [Z Z ].
C
Push
MR
w Push [FUNC] and [
enter .
SET MODE
e Push [Y Y ] or [Z Z ] several times
until "bAk" appears.
r Rotate [VOL] to select the de-
sired bank.
t Push [✱
] (or [CLR]) to assign the channel to the bank
ENT
and return to regular memory condition.
y Repeat steps q to t to assign another memory channel
to the same or another bank.
NOTE: Display type setting (pgs. 20, 53) in
must be selected "FR," otherwise the memory bank
] MODE
operation cannot be performed.
](8) to
SET
PWR
A D
B C
FUNC CLR
CALL MR
TONE P.BEEP T.SCAN BANK
1
2 3
DUP
SCAN SKIP OPT
4 0
5 6
PRIO
SET H/M/L
7
8 9 ENT
INITIAL SET
6
1
2
3
4
5
6
[VOL]
7
8
9
10
11
12
13
14
15
16
17
18
19
30