Resetting The Inverter; Figure 17, Resetting The Inverter - Magnum Energy MMS1012 Owner's Manual

Resetting the Inverter

Under some fault conditions (i.e., an internal fault), the inverter will
need to be reset.
To reset the inverter:
1. Press and hold the Power ON/OFF pushbutton for approximately
15 seconds, or until the status LED comes on and fl ashes rapidly
(see Figure 17).
2. Release the Power ON/OFF pushbutton once the rapid fl ashing
has begun. The status LED will go off.
3. Press the Power ON/OFF pushbutton again to turn the
inverter on.
Info: The Power ON/OFF pushbutton is a small
momentary type switch which operates by lightly
pressing and releasing.

Figure 17, Resetting the Inverter

© 2010 Magnum Energy, Inc.
4.0 Maintenance and Troubleshooting
S ta tu s L E D
In d ica to r
P o w e r O N/O FF
p u sh b u tto n
37