Figure 3, Top And Left Side Features - Magnum Energy MMS1012 Owner's Manual

1.0 Introduction

Figure 3, Top and Left Side Features

1. Inverter Status Indicator - this green LED illuminates to provide
information on the inverter's operation.
2. Power Switch - momentary pushbutton switch that turns the
inverter on or off.
3. Negative DC Terminal (black) - the inverter's connection to the
negative terminal on the battery bank.
4. Positive DC Terminal (red) - the inverter's connection to the
positive terminal on the battery bank.
5. Input Circuit Breaker - this circuit breaker protects the unit's
internal wiring and pass-thru relay.
6. Output Circuit Breaker - this circuit breaker provides another
layer of overload protection. Not a branch circuit-rated breaker.
Separate AC output breakers may be required on the output.
7. Mounting Flanges (x4) - secures the inverter to shelf/wall.
8. AC Wiring Compartment - provides access for all AC input and
output connections on the inverter.
9. AC Output Connection - AC knockout for hardwiring AC
output.
10. AC Input Connection
input. Strain relief comes with an attached fl exible AC input power
cord on the MMS1012- G model.
11. DC Ground Terminal - this connection is used to tie the exposed
chassis of the inverter to the DC grounding system. This terminal
accepts CU/AL conductors from #14 AWG to #6 AWG.
12. GFCI Outlet - Ground Fault Circuit Interrupter outlet (with test
and reset capability). Only available on MMS1012-G model.
4
1
12
8
10
9
- Strain relief clamp for hardwiring AC
© 2010 Magnum Energy, Inc.
2
5
3
6
4
11
7