Logging Into The Administrator Ui; Setting The Site Url - Polycom VMC 1000 Getting Started Manual

Video Media Center - VMC 1000 Getting Started Guide

Logging into the Administrator UI

Setting the Site URL

24
To log into the VMC 1000 Administrator UI:
Make sure the VMC 1000 appliance is plugged into your network and
1
turned on.
From your network connected PC, open Internet Explorer.
2
In the browser URL field, enter the IP address you created for the VMC
3
1000 appliance:
[ipaddress]/admin
Enter Administrator for the default login.
4
Enter polycom for the default password.
5
Click OK.
6
You are now logged into the VMC 1000 Administrator UI.
WARNING: The Site URL must include the http:// with the IP address.
Example Site URL: http://10.1.199.240
To set the Site URL:
From the VMC 1000 Administrator UI, click System Configuration.
1
Click Setup.
2
The System Setup page appears.
Polycom, Inc.