Uploading The Permanent Vmc 1000 License File; Setting Up The Network Connection - Polycom VMC 1000 Getting Started Manual

Video Media Center - VMC 1000 Getting Started Guide

Uploading the Permanent VMC 1000 License File

Setting Up the Network Connection

20
To complete the licensing process for the VMC 1000, you must upload the
permanent VMC 1000 license file.
To upload the permanent VMC 1000 license file:
From the VMC Initialization & Licensing menu, click License
1
Management.
Click the Browse button to navigate to the directory on the PC where the
2
VMC 1000 license file is located and select the file.
Click the Upload License button.
3
From the PC, go to Start>Control Panel>Network Connections.
1
Right click Local Area Connections and select Properties.
2
Scroll down to the Internet Protocol (TCP/IP) option and highlight it.
3
Click Properties.
4
Click the Use the following IP address button.
5
NOTE: Make sure you write down your network settings before you change them if
you are using a static IP address.
Enter the following default IP address values:
6
IP address: 192.168.1.10
a
subnet mask: 255.255.255.0
b
Default gateway: 192.168.1.1
c
Click OK.
7
NOTE: You are not able to ping the VMC 1000 appliance.
Polycom, Inc.