Editing The Network Configuration; Restarting The Vmc 1000 Appliance; Next Steps - Polycom VMC 1000 Getting Started Manual

Editing the Network Configuration

Restarting the VMC 1000 Appliance

Next Steps

Polycom, Inc.
Use the Network Configuration link to replace the default static IP values
originally entered for the appliance with the ones that you want to assign to
the appliance.
To edit the network configuration:
From the VMC Initialization & Licensing menu, click the Network
1
Configuration link.
Enter the IP Address.
2
Enter the Subnet Mask.
3
Enter the Default Gateway.
4
Enter the DNS Servers.
5
If you have more than one DNS server, separate each one using a comma
delimiter.
Click Save and Reboot.
6
Remove the cross over cable from the VMC 1000 and connect the VMC
7
1000 to your corporate network.
NOTE: Reset your PC back to its original settings.
To complete the licensing process, you must restart the VMC 1000.
To restart the VMC 1000 appliance:
From the VMC Initialization & Licensing menu, click System Status.
1
Click the Restart Server button.
2
After you have completed the licensing process, please proceed to the next
chapter, "Configuring the VMC 1000 Appliance"
configuring the VMC 1000 appliance.
Licensing the VMC 1000 Appliance
on page 23, to finish
21