Rebooting The Vmc 1000 Appliance; Monitoring The Status Of The Vmc 1000 Appliance; Logging Into The Administrator Ui - Polycom VMC 1000 Getting Started Manual

Polycom, Inc.

Rebooting the VMC 1000 Appliance

In order for the installation to be complete, you must reboot the VMC 1000
appliance.
To reboot the VMC 1000 appliance:
From the VMC Initialization & Licensing menu, click System Status.
1
Click the Restart Server button.
2
You can also reboot the Video Media Center - VMC 1000 appliance if any
of the service's status lights are red instead of green.

Monitoring the Status of the VMC 1000 Appliance

The System Status page allows you to check the status of the VMC 1000
services. The status for all the services should be green. If not, click the Restart
Server button. If you still have issues, contact Technical Support.

Logging into the Administrator UI

To log into the VMC 1000 Administrator UI:
Make sure the VMC 1000 appliance is plugged into your network and
1
turned on.
From your network connected PC, open Internet Explorer.
2
In the browser URL field, enter the IP address you created for the VMC
3
1000 appliance:
[ipaddress]/admin
Enter Administrator for the default login.
4
Enter polycom for the default password.
5
Click OK.
6
You are now logged into the VMC 1000 Administrator UI.
Installing the VMC 1000 Appliance on Your Network
11