The 4-Post Rack Assembly Consists Of; The 2-Post Rack Assembly Consists Of - Polycom VMC 1000 Getting Started Manual

Polycom, Inc.
Verify that the ship kit includes the following for installing the appliance in your
rack:
• Two power cords
• A crossover cable
• Screws, cone washers and cage nuts (shown below)
• 4-post and/or 2-post rack rail bracket assemblies
Hardware Kit: screws, cone washers, and cage nuts (from left to right)
• (Eight) M5 x 12 flat head screws
• (Two) 10-32 x 3/4" pan head screws
• (Twenty-two) M4 x 4 truss head screws
• (Eight) M5 x 12 cone washers
• (Ten) M5 Cage nuts
NOTE: Use the hardware supplied with your specific rack if different from the
hardware supplied in this kit.

The 4-post rack assembly consists of:

• A set of long, fixed rack brackets that attach directly to the rack itself.
• A set of medium-sized adjustable rack brackets that attach to the long,
fixed rack brackets.

The 2-post rack assembly consists of:

• A set of long, fixed rack brackets.
• Three sets of short rack brackets that attach to the long fixed rack brackets.
One of these sets has threaded holes (for placement in the front) to allow
the appliance to be secured in the rack.
Setting Up the VMC 1000 Appliance
5