Installing The Dummy Cover - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the power supply module in the direction of the
arrow (3).
V
CAUTION!
Never leave the bay for the power supply module empty for more than
two minutes during operation. Otherwise, excessive temperatures could
damage system components.
6.3.3

Installing the dummy cover

Figure 49: Installing the power supply dummy cover
Ê Attach the dummy cover on the left side (1).
I
Ensure the correct direction (marked with an arrow on the dummy
cover).
Ê Close the dummy cover (2) until it fits into place.
CX400 S1
Upgrade and Maintenance Manual
Power supply
85