Removing A 3.5-Inch Hdd Module; Installing A 3.5-Inch Hdd Module; Concluding Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

7.3.4.3

Removing a 3.5-inch HDD module

Ê Remove the HDD module to be replaced from the server as described in
section "Removing a 3.5-inch HDD module" on page
7.3.4.4

Installing a 3.5-inch HDD module

Ê Install the new HDD module into the empty drive bay as described in section
"Installing 3.5-inch HDD modules" on page
7.3.4.5

Concluding steps

Perform the following procedures:
"Performing a RAID array rebuild" on page 78
Ê
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
116.
112.
119