Removing The Power Distribution Module - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Basic hardware procedures
4.7

Removing the power distribution module

Ê Remove the power supply modules as described in section
power supply module" on page
Figure 15: Disconnecting the fan cables
Ê Disconnect the fan cable C3 from the top PDB (1), see also
the PDB" on page
Ê Remove six screws (2).
Ê Remove the mounting bracket.
I
For information about the cabling refer to chapter
54
84.
135.
Upgrade and Maintenance Manual
"Removing the
"Connectors on
"Cabling" on page
CX400 S1
191.