Replacing The Midplane; Required Tools; Preliminary Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Midplane
9.1

Replacing the midplane

I
The following description is also valid for the midplane with expander.
Field Replaceable Units (FRU)
Average task duration: 45 minutes
9.1.1

Required tools

Preliminary and concluding steps:
●
– Phillips PH2 / (+) No. 2 screw driver
Main steps:
●
– Phillips PH2 / (+) No. 2 screw driver
9.1.2

Preliminary steps

Perform the following procedures:
"Shutting down the server node" on page 41
Ê
"Removing the server enclosure out of the rack" on page 43
Ê
V
CAUTION!
For ALL service tasks, remove the CX400 S1 server enclosure out of
the rack and put it on a separate desk!
It is not allowed to draw the CX400 S1server enclosure partially out
of the rack.
"Removing the server node from the server enclosure" on page 48
Ê
"Opening the server enclosure" on page 51
Ê
"Removing the power supply module" on page 84
Ê
"Removing the power distribution module" on page 54
Ê
152 Upgrade and Maintenance Manual
CX400 S1