Download Print this page

Fujitsu Primergy CX400 S2 Operating Manual

Fujitsu primergy cx400 s2 server enclosure.
Hide thumbs

Advertisement

Operating Manual - English
PRIMERGY CX400 S2
Server Enclosure
Operating Manual
Edition December 2013

Advertisement

   Related Manuals for Fujitsu Primergy CX400 S2

   Summary of Contents for Fujitsu Primergy CX400 S2

  • Page 1

    Operating Manual - English PRIMERGY CX400 S2 Server Enclosure Operating Manual Edition December 2013...

  • Page 2

    – The contents of this manual may be revised without prior notice. – Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual. – No part of this manual may be reproduced in any form without the prior written permission of Fujitsu.

  • Page 3

    Before reading this manual For your safety This manual contains important information for safely and correctly using this product. Carefully read the manual before using this product. Pay particular attention to the accompanying manual "Safety Notes and Regulations" and ensure these safety notes are understood before using the product.

  • Page 4

    Please consult the sales staff of Fujitsu if intending to use this product for high safety use. Measures against momentary voltage drop This product may be affected by a momentary voltage drop in the power supply caused by lightning.

  • Page 5: Table Of Contents

    Contents Introduction ......7 Concept and target groups for this manual ..8 Documentation overview .

  • Page 6

    Contents Starting up and operation ....45 Overview of the server enclosure ....45 6.1.1 Front overview .

  • Page 7: Introduction

    All server nodes are half-wide, thus two of them may be positioned besides each other, and up to four 1U or two 2U nodes are the maximum number per PRIMERGY CX400 S2 server enclosure, thus density may be doubled compared to standard rack servers.

  • Page 8: Concept And Target Groups For This Manual

    This operating manual is intended for those responsible for installing the hardware and ensuring that the system runs smoothly. It contains all the information you need to put your PRIMERGY CX400 S2 server enclosure into operation. To understand the various expansion options, you will need to be familiar with the fields of hardware and data transmission and you will require a basic knowledge of the underlying operating system.

  • Page 9: Documentation Overview

    Introduction Documentation overview More information on your PRIMERGY CX400 S2 server node can be found in the following documents: – "Quick Start Hardware - PRIMERGY CX400 S2 Server Node" – "Quick Start Software - Quick Installation Guide" – "Safety Notes and Regulations" manual "...

  • Page 10: Notational Conventions

    Introduction All documentation on PRIMERGY hardware and ServerView software is available online from the Fujitsu manuals server at: – http://manuals.ts.fujitsu.com (global market) – http://jp.fujitsu.com/platform/server/primergy/manual (Japanese market) The complete PRIMERGY documentation set can also be downloaded as a DVD ISO image at: –...

  • Page 11: Functional Overview

    This section provides information on the features and technical data of the PRIMERGY CX400 S2 server enclosure. For information on key characteristics and layout of the system board, see the "PRIMERGY CX400 S2 Server Enclosure Upgrade and Maintenance Manual". Server enclosure...

  • Page 12

    CPUs will be forced to work with the lowest frequency. Each hot-plug power supply unit can be replaced during operation (see the "PRIMERGY CX400 S2 Upgrade and Maintenance Manual"). The server enclosure uses a hot-plug PSU, which automatically sets itself to a mains voltage in the range of 100 - 240 V.

  • Page 13: Server Enclosure Specification

    Functional overview Server enclosure specification This section explains the specifications for the server enclosure. The specifications for this server enclosure are liable to be updated without any notice. Please be forewarned. System Board Server enclosure type 2U chassis for 19-inch rack Rear bays 4 bays for half wide server nodes and 2 bays for PSU Fan configuration...

  • Page 14

    Functional overview Electrical data (hot-plug power supply unit) Rated voltage range 100 - 240 V Frequency 50 Hz - 60 Hz Max. rated current Effective power 1400 W Apparent power 1445 VA Heat dissipation 5040.0 kJ/h (4777.0 BTU/H) Main power fuse 16 A Protection class Power supply configuration note...

  • Page 15

    Functional overview Noise level Noise emission Measured according to ISO 7779 and declared according to ISO9296 Sound power (LWAd; 6.9 B (idle) / 7.4 B (operating) 1B = 10dB) Drive bays Product Model Name CX250 S2 CX270 S2 Product Type Dual Socket Dual Socket Server Node...

  • Page 16

    Functional overview Compliance with regulations and standards Product safety and ergonomics International IEC 60950-1 2ed; am1 Europe Safety EN 60950-1 2ed.; am1 EN 50371 EN 50392 Ergonomics ISO 9241-3 EN 2941-3 EK1-ITB2000:2013 USA / Canada CSA-C22.2 No. 60950-1-07 2ed. UL 60950-1 2ed. Taiwan CNS 14336 China...

  • Page 17

    Functional overview Mounting order Figure 1: Mounting order Item Installation bay 1 for server node CX250 S2 Installation bay 2 for server node CX250 S2 or CX270 S2 Installation bay 3 for server node CX250 S2 Installation bay 4 for server node CX250 S2 or CX270 S2 Installation bay 1 for PSU Installation bay 2 for PSU Table 1: Mounting order of server nodes...

  • Page 18

    Functional overview Operating Manual CX400 S2...

  • Page 19: Installation Steps, Overview

    Installation steps, overview This chapter contains an overview of the steps necessary to install your server enclosure. Links take you to sections where you can find more detailed information about the respective steps: Ê First of all, carefully read the safety instructions in "Important information"...

  • Page 20

    Details on how to operate the ServerView Installation Manager, as well as some additional information, are included in the "ServerView Suite Installation Manager" user’s guide (on the Fujitsu manuals server under Industry Standard Servers - Software - ServerView Suite - Server Installation and Deployment).

  • Page 21: Important Information

    Important information In this chapter you will find essential information regarding safety when working on your server enclosure. Safety instructions The following safety instructions are also provided in the manual "Safety Notes and Regulations" or " 安全上のご注意 ". This device meets the relevant safety regulations for IT equipment. If you have any questions about whether you can install the server enclosure in the intended environment, please contact your sales outlet or our customer service team.

  • Page 22

    Important information Before starting up CAUTION! During installation and before operating the device, observe the ● instructions on environmental conditions for your device (see "Server enclosure specification" on page 13). If the server enclosure has been moved from a cold environment, ●...

  • Page 23

    Important information CAUTION! Ensure that the power sockets on the device and the properly ● grounded power outlets are freely accessible. The On/Off button or the main power switch (if present) does not ● isolate the device from the mains power supply. To disconnect it completely from the mains power supply, unplug all network power plugs from the properly grounded power outlets.

  • Page 24

    Important information CAUTION! Proper operation of the system (in accordance with IEC 60950-1/2 ● resp. EN 60950-1/2) is only ensured if the casing is completely assembled and the rear covers for the installation slots have been fitted (electric shock, cooling, fire protection, interference suppression).

  • Page 25

    ● concerning special waste. Replace the lithium battery on the system board in accordance with ● the instructions in the "PRIMERGY CX400 S2 Server Enclosure Upgrade and Maintenance Manual". All batteries containing pollutants are marked with a symbol (a ●...

  • Page 26

    Important information Working with CDs/DVDs/BDs and optical drives When working with devices with optical drives, these instructions must be followed. CAUTION! Only use CDs/DVDs/BDs that are in perfect condition, in order to ● prevent data loss, equipment damage and injury. Check each CD/DVD/BD for damage, cracks, breakages etc.

  • Page 27

    Important information Do not contaminate the CD/DVD/BD surface with fingerprints, oil, ● dust, etc. If dirty, clean with a soft, dry cloth, wiping from the center to the edge. Do not use benzene, thinners, water, record sprays, antistatic agents, or silicone-impregnated cloth. Be careful not to damage the CD/DVD/BD surface.

  • Page 28

    Important information Modules with Electrostatic-Sensitive Devices Modules with electrostatic-sensitive devices are identified by the following sticker: Figure 2: ESD label When you handle components fitted with ESDs, you must always observe the following points: Switch off the system and remove the power plugs from the power outlets ●...

  • Page 29: Ce Conformity

    Important information Other important information: During cleaning, observe the instructions in section "Cleaning the server ● enclosure" on page Keep this operating manual and the other documentation (such as the ● technical manual, documentation DVD) close to the device. All documentation must be included if the equipment is passed on to a third party.

  • Page 30: Fcc Class A Compliance Statement

    Consult the dealer or an experienced radio/TV technician for help. ● Fujitsu is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.

  • Page 31: Transporting The Server Enclosure

    Important information Transporting the server enclosure CAUTION! Only transport the server enclosure in its original packaging or in packaging that protects it from impacts and jolts. Do not unpack the server enclosure until it is at its installation location. If you need to lift or transport the server enclosure, ask other people to help you.

  • Page 32: Notes On Installing The Server Enclosure In The Rack

    Important information Notes on installing the server enclosure in the rack CAUTION! For safety reasons, at least two people are required to install the ● server enclosure in the rack because of its weight and size. (For the Japanese market, please refer to " 安全上のご注意 ".) Never lift the server enclosure into the rack using the handles.

  • Page 33: Environmental Protection

    Important information Environmental protection Environmentally-friendly product design and development This product has been designed in accordance with the Fujitsu standard for "environmentally friendly product design and development". This means that key factors such as durability, selection and labeling of materials, emissions, packaging, ease of dismantling and recycling have been taken into account.

  • Page 34

    Details regarding the return and recycling of devices and consumables within Europe can also be found in the "Returning used devices" manual, via your local Fujitsu branch or from our recycling center in Paderborn: Fujitsu Technology Solutions Recycling Center D-33106 Paderborn Tel.

  • Page 35: Hardware Installation

    Hardware installation CAUTION! Follow the safety instructions in chapter "Important information" on ● page Do not expose the server enclosure to extreme environmental ● conditions (see "Ambient conditions" on page 14). Protect the server enclosure from dust, humidity and heat. Make sure that the server enclosure is acclimatized for the time ●...

  • Page 36: Unpacking The Server Enclosure

    Hardware installation Unpacking the server enclosure CAUTION! Follow the safety instructions in chapter "Important information" on page Ê Transport the server enclosure to the place where you want to set it up. Ê Do not unpack the server enclosure until it is at its installation location. Ê...

  • Page 37: Installing/removing The Server Enclosure In/from The Rack

    If several units are simultaneously extended out of the rack, there is a risk that the rack could tip over. Fujitsu rack systems The rack systems from Fujitsu support the installation of PRIMERGY server enclosures: – PRIMECENTER rack –...

  • Page 38

    The power is supplied via the multiple socket outlets fitted in the rack (for the EMEA market). The main features of Fujitsu rack systems are as follows: – rail systems that can be mounted without tools – support systems having a linear alignment feature to ensure that they can...

  • Page 39: Installing An Additional Server Node To The Server Enclosure

    Hardware installation Installing an additional server node to the server enclosure CAUTION! Follow the safety instructions in the chapter "Important information" ● on page All nodes are hot pluggable. Therefore, shutting down the multi-node server system is not necessary. Figure 3: Removing the server node dummy module Ê...

  • Page 40

    Ê If applicable, install an additional server node. Ê If applicable, connect all external cables to the server node. For further information refer to the “PRIMERGY CX400 S2 Server Node Upgrade and Maintenance manual”. Operating Manual...

  • Page 41: Connecting The Server Enclosure To The Mains

    The system has two bays for hot-swap power supply units. If one power supply unit is defective a warning is generated and all CPUs will be forced to work with the lowest frequency. Each hot-plug power supply unit can be replaced during operation (see the "PRIMERGY CX400 S2 Upgrade and Maintenance Manual"). CAUTION! The server enclosure is automatically set to a mains voltage in the range 100 - 240 V.

  • Page 42: Securing The Power Cord

    Hardware installation 5.4.1 Securing the power cord Figure 5: Securing power cord Ê Loop the cable tie around the power cord and the handle of the power supply module (1). Ê Close the cable tie around the power cord (1) and pull tight (2) to secure the power cord.

  • Page 43: Notes On Connecting/disconnecting Cables

    Hardware installation Notes on connecting/disconnecting cables CAUTION! Always read the documentation supplied with the device you wish to connect. Never connect, or disconnect cables during a thunderstorm. Never pull on a cable when disconnecting it. Always take hold of the cable by the plug.

  • Page 44

    Hardware installation Operating Manual CX400 S2...

  • Page 45: Starting Up And Operation

    Starting up and operation CAUTION! Please note the safety instructions in chapter "Important information" on page Overview of the server enclosure 6.1.1 Front overview Figure 6: Configuration with 24x 2.5" HDDs With CX250 S2 server nodes Pos. Component Front panel module for server node 1 Front panel module for server node 2 Front panel module for server node 3 Front panel module for server node 4...

  • Page 46

    Starting up and operation With CX270 S2 server nodes Pos. Component Front panel module for server node 1 Front panel module for server node 2 24x 2.5-inch hard disk drives / trays Figure 7: Configuration with 12x 3.5" HDDs With CX250 S2 server nodes Pos.

  • Page 47: Rear Overview

    Rear overview 6.1.2.1 CX400 S2 server enclosure with CX250 S2 server nodes Figure 8: PRIMERGY CX400 S2 server enclosure rear with CX250 S2 server nodes Pos. Component Installation bay 1 for CX250 S2 server nodes Installation bay 2 for CX250 S2 server nodes...

  • Page 48: Cx400 S2 Server Enclosure With Cx270 S2 Server Nodes

    Starting up and operation 6.1.2.2 CX400 S2 server enclosure with CX270 S2 server nodes Figure 9: PRIMERGY CX400 S2 server enclosure rear with CX270 S2 server nodes Pos. Component Installation bay 1 for CX270 S2 server nodes Installation bay 2 for CX270 S2 server nodes...

  • Page 49: Controls And Indicators

    Starting up and operation 6.1.3 Controls and indicators In this section controls and indicators are described. 6.1.3.1 Controls and Indicators on the front panel Figure 10: Controls and indicators on the front panel Pos. Component On/Off button / Power-on indicator ID button / ID indicator Function Status...

  • Page 50

    Starting up and operation Function Status Description Green/Orange LED: Power on and fault alternate flashing ID indicator Blue LED: flashing Select mode Blue LED: off Normal mode Table 3: Power-on indicator and ID indicator Power-on indicator (green) Lights up green when the server enclosure is switched ON. Flashes green if the server node has been switched on and is in an error state.

  • Page 51: Indicators On The Hard Disk Drives

    Starting up and operation 6.1.3.2 Indicators on the hard disk drives Figure 11: Indicators on the 2.5 inch HDD modules (A) and on the 3.5 inch HDD modules (B) 1 HDD / SSD FAULT (orange) (in conjunction with a RAID controller) –...

  • Page 52: Indicator On Hot-plug Power Supply Unit

    Starting up and operation 6.1.3.3 Indicator on hot-plug power supply unit Figure 12: Indicator on hot-plug PSU Indicator on hot-plug PSU (two colors) Lights up green when the server enclosure is switched on and functioning properly. Lights up yellow if the PSU has failed. 6.1.3.4 Indicators of the server nodes The description of the indicators of the server nodes you may find in the...

  • Page 53: Switching The Multi-node Server System On And Off

    Furthermore, Fujitsu cannot be held responsible for any related damage, malfunction, or loss of data, etc. Be sure to wait for 10 seconds or more after shutdown before turning ●...

  • Page 54

    Starting up and operation Switching the server node on Ê Press the On/Off button of the desired server node on the rear or on the front. Then the power-on indicator lights up green. – Starting up for the first time: For the Japanese market, please refer to "...

  • Page 55

    Starting up and operation – After power failure The server node automatically reboots following a power failure (depending on the settings in the BIOS or in BMC). – Power-on indicator override The server node can be switched off (hard power off) by holding down the On/Off button (approximately 4 - 5 seconds).

  • Page 56: Cleaning The Server Enclosure

    Starting up and operation Cleaning the server enclosure CAUTION! Switch the server enclosure off and disconnect the power plugs from the properly grounded power outlets. Do not clean any interior parts yourself; leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic.

  • Page 57: Property And Data Protection

    Property and data protection To protect the installed server nodes and data internally against unauthorized access, you can use the BIOS Setup security functions. BIOS Setup security functions The Security menu in BIOS Setup offers various options for protecting your data from unauthorized access.

  • Page 58

    Property and data protection Operating Manual CX400 S2...

  • Page 59: Troubleshooting And Tips

    Troubleshooting and tips CAUTION! Follow the safety instructions in the "Safety notes and regulations" manual or " 安全上のご注意 " and in chapter "Important information" on page If a fault occurs, attempt to resolve it using the measures described: – in this chapter, –...

  • Page 60: Drives Reported As "dead" When Starting System

    Troubleshooting and tips Drives reported as “dead” when starting system This error message can occur when the onboard SAS controller has RAID functionality or the server enclosure is equipped with a PCI RAID controller. RAID controller configuration incorrect Ê Check and correct the settings for the drives using the RAID controller utility. Added drive reported as defective RAID controller is not configured for this drive The drive was probably installed when the system was switched off.

Comments to this Manuals

Symbols: 0
Latest comments: