Installing The Fan1 - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

System fan
8.2.5.1

Installing the fan1

air flow
Figure 97: Installing fan1 in the fan holder
Ê Insert fan1 in the left part of the fan holder (1).
I
Take note of the air flow direction (2).
Ê Run the fan cable along the bottom of the fan holder (3).
Ê Pull the fan cable through the recess on the right side (4).
Ê Secure the fan with four screws.
142 Upgrade and Maintenance Manual
CX400 S1