Linking Boards; Linking Boards In 2.5-Inch Hdd Chassis; Basic Information - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

10

Linking boards

Safety
V
CAUTION!
Do not damage or modify internal cables or devices. Doing so may
●
cause a device failure, fire, or electric shock.
Devices and components inside the server remain hot after
●
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
If devices are installed or disassembled using methods other than
●
those outlined in this chapter, the warranty will be invalidated.
For further information, please refer to chapter
●
information" on page
10.1

Linking boards in 2.5-inch HDD chassis

10.1.1 Basic Information

The chassis for 2.5" HDD is equipped with four different linking boards.
CX400 S1
31.
Upgrade and Maintenance Manual
"Important
159