Removing The Fan From The Fan Holder - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Figure 94: Removing the fan module (B)
Ê Remove four screws.
Ê Carefully lift the fan module out of the chassis.
V
CAUTION!
Ensure not to strain the fan cables!
Ê Replace the defective fan as described in section
fan module" on page
8.2.4

Removing the fan from the fan holder

I
If you want replace fan1, you have to remove fan2 before.
If you want replace fan4, you have to remove fan3 before.
CX400 S1
136.
Upgrade and Maintenance Manual
System fan
"Replacing the fan in the
139