Ê Install the power supply module as described in section
supply module" on page
4.9
Closing the server enclosure
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
For further safety information, please refer to chapter
●
information" on page
4.9.1
2.5-inch chassis
4.9.1.1
Installing the top cover 2
Figure 26: Installing the top cover 2 on the 2.5-inch chassis (A)
Ê Place the top cover 2 on the chassis.
Ê Secure the top cover 2 with six screws.
CX400 S1
80.
31.
Upgrade and Maintenance Manual
Basic hardware procedures
"Installing the power
"Important
61