Removing The Fan Module - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

8.2.3

Removing the fan module

I
There are available two different kinds of fan modules:
– fan module without detachable cable
– fan module with detachable cable
Follow the appropriate procedure described in the sections
detachable cable" on page 137
page 138.
Fan without detachable cable
Figure 91: Removing the fan module (A)
Ê Disconnect the fan cables from the corresponding PDB:
– For fan1 and fan2 from the top PDB (1)
– For fan3 and fan4 from the bottom PDB (2)
Ê Thread the fan cables carefully through the recess (3).
CX400 S1
or
Upgrade and Maintenance Manual
"Fan with detachable cable" on
System fan
"Fan without
137