Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual page 60

Basic hardware procedures
Figure 24: Installing the power distribution module (C)
Ê Secure the power distribution board with two screws.
Figure 25: Connecting the fan cables
Ê Slide the power cables trough the recess.
Ê Connect the fan cables C3 to the top and bottom PDBs (1). For information
about the fan cabling refer to chapter
and chapter "Cabling" on page
Ê Connect the power cables to the midplane and the HDD/SSD backplane.
For information about the cabling refer to chapter
Ê Secure the mounting bracket with six screws (2).
60
191.
Upgrade and Maintenance Manual
"Connectors on the PDB" on page 135
"Cabling" on page 191.
CX400 S1